Civil Engineering Drawing Mock Test 6

1. __________ is the built up covered area of a building measured at floor level of any storey.

2. For a four layer flexible pavement, there is a surface course, base course, and ______________ constructed over a compacted, natural soil subgrade.

3. Name the type of pointing, where mortar is pressed hard in the raked joints and by finishing off flush with the edge of masonry units. The edges are neatly trimmed with trowel and straight edge.

4. Many populated domestic islands are connected to the mainland by bridges.

5. For 2.5 cm thick c.c. floor of 1:2:4 proportion, for 100 sq m, what amount of stone aggregate will be required?

6. Laying cement concrete – 6beldars, 8 mazdoors, ¾ Bhishti and ¼ mason can do 2.83 cu m(100 cu ft) per day.

7. For sanitary purpose galvanised iron pipes and specials shall be of class "C" heavy type, first quality and shall conform to IS 1239 be used.

8. Gypsum plaster, or plaster of Paris, is produced by heating __________ to about 300 °F.

9. The number of trips (N) in a 8-hour working day is calculated by the formula __________

10. ________________ is the amount provided in the estimate and bill of quantities for some specialised work to be done by a specialised firm; whose details are not known at the time of preparing estimate.