Civil Engineering Drawing Mock Test 7

1. 1st class brick shall be soaked in clean water by submerging in a tank for a period of 2 hours immediately before use.

2. For brickwork in mud mortar the bond of brickwork shall be of English bond.

3. The type of transition curves generally provided on hill roads, is ________

4. If subgrade is soft or weak, a thick sub-base of cheap and inferior materials well compacted should be used.

5. An Executive Engineer of roads, executes works under direct control of _________

6. Hard, rough and durable granite stone ballast _________ gauge, shall be used.

7. For lime concreting in roof terracing the concrete shall be kept wet for _____________

8. There are two main natural forces responsible for causing defects in timber: abnormal growth and ____________________

9. For fourth class building roofing shall be of __________ over bamboo and wooden supports.

10. An ___________________ beam is one in which the tension capacity of the tensile reinforcement is smaller than the combined compression capacity of the concrete and the compression steel (under-reinforced at tensile face).