Digital Circuits Practice Test 3

1. Total number of inputs in a half adder is __________

2. Let A and B is the input of a subtractor then the borrow will be ___________

3. In Integrated Injection, logic output is received through the __________

4. Integrated Injection logic cannot be denoted as __________

5. If the two numbers are unsigned, the bit conditions of interest are the ______ carry and a possible _____ result.

6. Semiconductors are made of ____________

7. CMOS is also sometimes referred to as ____________

8. The full form of COS-MOS is ____________

9. When the outputs of two inverters are wired together the result is __________

10. Critical defects per unit chip area are ________ for a MOS transistor.