My Report

Engineering Mechanics Practice Test 3


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

1. If all the reactive forces are intersecting at the common point or pass through a common axis when _____________

2. To satisfy the conditions of the equilibrium, the must not only be having a net force zero, but also be properly held or constrained on its supports.

3. If the non-Uniform loading is of the type of parabola then?

4. Determine the magnitude of the resultant force acting on the shaft shown from left.

engineering-mechanics-questions-answers-reduction-simple-distributed-loading-q4

5. Determine the horizontal components of the reaction on the beam caused by the pin at Q.
engineering-mechanics-questions-answers-quiz-q3

6. For the conditions of the equilibrium of the body, i.e. the rigid body only the external forces defines the equilibrium. And the support reactions only adds the rotation part of the body.

7. There are two types of loading. The uniformly distributed and the non-uniformly distributed that is the one having two different values at corners.

8. The three member forces are greatly influencing the moment than the two force members.

9. ∑Fx=0, ∑Fy=0 and ∑Fz=0 are vector equations for the three dimensions. They are satisfied when the body is achieved its state of equilibrium.

10. For equilibrium, the net moment acting on the body by various forces is zero.


 

Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.