Engineering Metrology Mock Test 9

10%

Question 1 of 10

1. How many laser interferometers are provided on y-axis slide?

Question 1 of 10

Question 2 of 10

2. What are the core principles of the TQM in a company-wide effort?

Customer and process orientation only

Process orientation and continuous improvement only

Continuous improvement, process and customer orientation

Continuous improvement only

Question 2 of 10

Question 3 of 10

3. What is the use of SPC software in CMMs?

Quality analysis of measurement

System analysis of measurement

Dynamic analysis of measurement

Statistical analysis of measurement

Question 3 of 10

Question 4 of 10

4. What is the cause of translational errors in CMM?

Twisting error

Error in straightness

Roll error

Error in scale division

Question 4 of 10

Question 5 of 10

5. Which direction is sensed by a linear measurement transducer used in CMM?

Not used to sense directions

Negative direction only

Both positive and negative direction

Positive direction only

Question 5 of 10

Question 6 of 10

6. Which drivers are used in TQM system?

Management commitment and vision

Competition, Survival and export drive

Teamwork participation and customer satisfaction

Quality tools and technique

Question 6 of 10

Question 7 of 10

7. What is the maximum error for perpendicularity of spindle sleeve with a base plate?

0.5/1000 mm for plane horizontal to plane passing through the axes of both spindle and column

0.15/1000 mm for plane horizontal to plane passing through the axes of both spindle and column

0.15/1000 mm for plane vertical to plane passing through the axes of both spindle and column

0.5/1000 mm for plane vertical to plane passing through the axes of both spindle and column

Question 7 of 10

Question 8 of 10

8. For testing squareness of spindle axis with table, when was reading taken down?

At every 180° rotation of spindle

At every 60° rotation of spindle

At every 90° rotation of spindle

At every 120° rotation of spindle

Question 8 of 10

Question 9 of 10

9. How many degrees of freedom is in the robotic arm?

Question 9 of 10

Question 10 of 10

10. How many detector elements are present in a matrix array solid state camera?

216 x 216 per array

156 x 156 per array

116 x 116 per array

256 x 256 per array

Question 10 of 10