My Report

Heat Transfer Practice Test 10


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

1. What is the value of overall heat transfer coefficient for air condensers?

2. Air at 25 degree Celsius flows over a flat surface with a sharp leading edge at 1.5 m/s. Find the boundary layer thickness at 0.5 from the leading edge. For air at 25 degree Celsius, kinematic viscosity = 15.53* 10n -6 m2/s

3. What is the value of characteristics length in turbulent film condensation?

4. What is the value of Reynolds number in terms of mass flow rate?

5. After being in service for a period of six months, a heat exchanger transforms 10% less heat than it does what new. Determine the effective fouling factor in terms of its clean overall heat transfer coefficient. It may be presumed that the heat exchanger operates between the same temperature differentials and that there is no change in the effective surface area due to scale build up

6. The transition from laminar to turbulent pattern of flow occurs at values of Reynolds number between

7. The conditions for flow beyond the boundary layer and its outer edge are

8. Which of the following is not associated with a heat exchanger?

9. A plate 0.3 m long is placed at zero angle of incidence in a stream of 15 degree Celsius water moving at 1 m/s. Find out the maximum value of the normal component of velocity at thr trailing edge of the plate. For water at 15 degree Celsius
p = 998.9 kg /m3
µ = 415.85 * 10 -2 kg/hr m

10. Which one is having the lowest thermal conductivity?


 

Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.