Highway Engineering Mock Test 10

10%

Question 1 of 10

1. If the principal is P and rate of interest is i and it has to be paid in n years then, the sum S is given by __________

P(1+i)

P/I

P(1+i)ⁿ

P(1-i)

Question 1 of 10

Question 2 of 10

2. What is the speed limit on the national highway on hill road in Kmph?

Question 2 of 10

Question 3 of 10

3. The thickness of the pitching done by stone masonry to avoid erosion due to water is?

0.3 m

0.1 m

1.0 m

1.5 m

Question 3 of 10

Question 4 of 10

4. The foundation bed is provided with a downward slope of __________ towards the hill side.

1 in 3

1 in 1

1 in 6

1 in 5

Question 4 of 10

Question 5 of 10

5. The best type of material for retaining wall is __________

Stone masonry

Brick masonry

Concrete

Composite

Question 5 of 10

Question 6 of 10

6. What is the value of the valley curve when compared with the summit curve for the same design speed may be best justified by?

Valley curve value is greater

Depends on the deviation angle

Summit curve value is greater

Both are equal

Question 6 of 10

Question 7 of 10

7. The flatter camber may be provided if the road has a longitudinal gradient greater than __________

1 in 30

1 in 35

1 in 40

1 in 20

Question 7 of 10

Question 8 of 10

8. What is the minimum carriage way width for MDR?

6.5 m

8.0 m

6.0 m

7.5 m

Question 8 of 10

Question 9 of 10

9. The problem which doesn't cause landslide in the hill road is?

Stable rock

Unstable rock

Overlay of relatively weak soil

Ground water flow

Question 9 of 10

Question 10 of 10

10. The pressing problems on the existing highway are __________

Encroachment

Ribbon development

Traffic

Both encroachment and ribbon development

Question 10 of 10