Irrigation Engineering Mock Test 10

10%

Question 1 of 10

1. Timber is generally transported in our country through ________________

air routes

rail routes

water routes

road routes

Question 1 of 10

Question 2 of 10

2. What is the highest elevation of water level that can be maintained in the reservoir without any spillway discharge either with gated or non-gated spillway?

Weighted average level

Normal Water level

Operating head

Minimum Water level

Question 2 of 10

Question 3 of 10

3. The Pumps in series operation allow the head to increase and the pumps in parallel operation increase the flow rate.

False

True

Question 3 of 10

Question 4 of 10

4. Fossil fuels are used in _____________________

an ordinary thermal power plant

a nuclear power plant

atomic power plant

a hydropower plant

Question 4 of 10

Question 5 of 10

5. The correct sequence in the direction of the flow of water for installations in a hydropower plant is _______________________

Reservoir, Penstock, Turbine, Surge tank

Reservoir, Surge tank, Turbine, Penstock

Reservoir, Surge tank, Penstock, Turbine

Reservoir, Penstock, Surge tank, Turbine

Question 5 of 10

Question 6 of 10

6. Wrought iron pipes are heavier than cast iron pipes and cannot be easily fabricated.

False

True

Question 6 of 10

Question 7 of 10

7. If two identical pumps each capable to deliver a discharge Q against a head H are connected ___________________________

in parallel, the resulting discharge is 2Q against a head H

in series, the resulting discharge is 2Q against a head H

in series, the resulting discharge is Q against a head 2H

in parallel, the resulting discharge is Q against a head of 2H

Question 7 of 10

Question 8 of 10

8. The depth of water stored in an irrigation tank rarely exceeds ______________

8 m

16 m

12 m

4 m

Question 8 of 10

Question 9 of 10

9. The alignment of the waterway should be________________

circular

straight

parabola

irregular alignment

Question 9 of 10

Question 10 of 10

10. Which of the following theory is the most accurate method to design arch?

The theory of elastic arches

The trial load method

The thin cylinder theory

Creep theory

Question 10 of 10