In the Online Petroleum Production Operations Test, for every correct answer, you will be given 2 points. There will also be negative marking of -1 for every wrong answer. So, you will have to be more careful in choosing the answers to the question in your online examination. If needed, you should skip to the next question and come back to the previous question later so that you can do proper time management for the online mock tests.
Based on your score, you would be given one of the following Grades:
Grade A* - Genius (You scored 100%)
Grade A - Excellent (Your score is in the range of 80% to 99%)
Grade B - Good (Your score is in the range of 60% to 80%)
Grade C - Average (Your score is in the range of 40% to 60%)
Grade D - Poor (Your score is in the range of 0% to 40%)
There will be 5 types of Petroleum Production Operations Tests. The details of each of these tests are as follows:
For every "Petroleum Production Operations Practice Test", Total Questions: 20, Total Time: Unlimited.
For every "Petroleum Production Operations Mock Test", Total Questions: 20, Total Time: 20 Minutes.
For "Petroleum Production Operations Certification Test", Total Questions: 50, Total Time: 1 hour.
For "Petroleum Production Operations Internship Test", Total Questions: 50, Total Time: 1 hour.
For "Petroleum Production Operations Job Test", Total Questions: 50, Total Time: 1 hour.
Before you get started on these series of online tests on Petroleum Production Operations, you should learn, study and practice our collection of 1000 MCQs (Multiple Choice Questions and Answers) on Petroleum Production Operations here. We also prefer that you should practice Petroleum Production Operations practice tests and mock tests completely before attempting the certification test.
Here is the list of online practice tests and mock tests on Petroleum Production Operations. Each online test focuses on a "Specific chapter of Petroleum Production Operations". So, you should try both practice test and mock test on every chapter to do a self-assessment of your knowledge (along with time-limit constraints) in every area or sub-topic of Petroleum Production Operations. Petroleum Production Operations Certification test, Internship test, and Job Test are mentioned at the end of this list.
1. Petroleum Production Operations Test 1 – This set of online test on “Petroleum Production Operations” tests your skills on Geologic Considerations – The Habitat of Oil and Gas, Traps for Oil and Gas Accumulation, Fractures and Joints in Reservoir Rocks, Sandstone Reservoirs, Geologic Factors Affecting Reservoir Properties in Sandstone Reservoirs, Geologic Concepts Application in Carbonate Reservoirs, Hydrocarbon Properties of Oil and Gas, Characteristics of Reservoir Rocks, Fluid Flow in the Reservoir, Effects of Reservoir Characteristics on Well Completions.
2. Petroleum Production Operations Test 2 – This set of online test on “Petroleum Production Operations” tests your skills on Reservoir Drive Mechanisms, Well Testing – Productivity or Deliverability Tests, Transient Pressure Tests, Drill Stem Testing, Recommendations for Obtaining Good Test Data, Cementing Materials, Cement Additives, Cement Bonding, Flow Properties of Primary Cements, Primary Cementing – Displacement Mechanics.
3. Petroleum Production Operations Test 3 – This set of online test on “Petroleum Production Operations” tests your skills on Well Completion Design – Conventional Tubular Configurations, Unconventional Tubular Configurations, Well Completion Design Concepts, Completion Equipment – Production Tubing, Corrosion, Packers, Effect of Pressure and Temperature Changes, Subsurface Control Equipment, Wellhead Equipments.
4. Petroleum Production Operations Test 4 – This set of online test on “Petroleum Production Operations” tests your skills on Perforating Oil & Gas Wells, Types of Perforators, Perforator Performance Evaluation, Factors Affecting Perforating Results, Perforating – Fluids, Pressure Differential & Formation Properties, Functions Requirements Selection Criteria, Formation Damage Related to Solids, Oil Fluids – Practical Application, Clear Water Fluids – Practical Applications, Conventional Water Based Mud, Oil Base or Invert Emulsion Mud.
5. Petroleum Production Operations Test 5 – This set of online test on “Petroleum Production Operations” tests your skills on Perforating Fluids and Packer Fluids, Workover Fluids – Well Killing, Logging Devices, Application of Through Tubing Production Logging, Field Examples of Production Logging Techniques, Primary Cement Evaluation, Problem Wells, Problems with Artificial Lift Wells, Paraffin and Asphaltene Chemistry, Paraffins & Asphaltenes – Deposition Mechanisms.
6. Petroleum Production Operations Test 6 – This set of online test on “Petroleum Production Operations” tests your skills on Paraffins & Asphaltenes – Removal of Wax Deposits, Preventing or Decreasing Wax Deposition, Design of Wax Control, Squeeze Cementing – Theoretical Considerations, Practical Considerations, Special Squeeze Cementing Situations, Planning a Squeeze Cement Job, Normal Operational Procedure, Other Operational Procedure, Introduction to Sand Control, Sand Control – Reduction of Drag Forces, Mechanical Methods of Sand Control.
7. Petroleum Production Operations Test 7 – This set of online test on “Petroleum Production Operations” tests your skills on Sand Control – Practical Considerations in Gravel Packing, Use of Screen without Gravel, Resin Consolidation Methods, Comparison of Sand Control Methods, Introduction to the Formation Damage, Basic Causes of Formation Damage, Classification of Formation Damage Mechanisms, Formation Clays, Formation Damage – Asphaltene Plugging, Mathematical Expressions.
8. Petroleum Production Operations Test 8 – This set of online test on “Petroleum Production Operations” tests your skills on Characteristics of Surfactants, Use and Action of Surfactants, Formation Damage Susceptible to Surfactant Treatment, Preventing or Removing Damage, Well Stimulation with Surfactants, Increasing Effectiveness of Rod Pumping, Prevention of Well Damage, Acids used in Well Stimulation, Acid Additives, Carbonate Acidizing, Acidizing Techniques for Carbonate Formations, Sandstone Acidizing.
9. Petroleum Production Operations Test 9 – This set of online test on “Petroleum Production Operations” tests your skills on Potential Safety Hazards in Acidizing, Introduction to Hydraulic Fracturing, Mechanisms of Hydraulic Fracturing, Production Increase from Hydraulic Fracturing, Hydraulic Fracturing – Propping the Fracture, Frac Fluids, Frac Job Design, Frac Job Evaluation Techniques, Introduction to Scale Deposition, Removal and Prevention, Causes of Scale Deposition, Prediction and Identification of Scale, Scale Removal.
10. Petroleum Production Operations Test 10 – This set of online test on “Petroleum Production Operations” tests your skills on Scale Prevention, The Corrosion Process, Detection and Measurement of Corrosion, Conventional Production Rigs, Non-Conventional Workover Systems, Reasons for Workover, Workover to Alleviate Formation Damage, Workover for Low Permeability Well, Workover to Reduce Water Production in Oil and Gas Wells, Workover to Sand Control, Workover to Change Zones or Reservoirs, Workover to Multicomplete, Workover to Increase Production in Wells.
Sanfoundry will issue a Certificate of Merit to Top 5 Rankers for a given month provided that they have scored either A* or A Grade in the Contest. If you are interested, then kindly register below. After registration, you can take the test anytime (24x7).