Our Steam and Gas Turbines Tests allow you to experience an online examination in the real-time environment. In every online test on Steam and Gas Turbines, you will be presented with Multiple Choice Questions (MCQs) which will test your skills in Steam and Gas Turbines Concepts in a detailed and comprehensive manner. In the test, each question will have 4 options to choose from. You should select only 1 correct option as an answer and then move on to the next question. Once you submit answers to all the questions, you will be given your final test score.In the Online Steam and Gas Turbines Test, for every correct answer, you will be given 2 points. There will also be negative marking of -1 for every wrong answer. So, you will have to be more careful in choosing the answers to the question in your online examination. If needed, you should skip to the next question and come back to the previous question later so that you can do proper time management for the online mock tests.
Based on your score, you would be given one of the following Grades:
Grade A* - Genius (You scored 100%)
Grade A - Excellent (Your score is in the range of 80% to 99%)
Grade B - Good (Your score is in the range of 60% to 80%)
Grade C - Average (Your score is in the range of 40% to 60%)
Grade D - Poor (Your score is in the range of 0% to 40%)
There will be 5 types of Steam and Gas Turbines Tests. The details of each of these tests are as follows:
1. "Steam and Gas Turbines Practice Tests 1-10" - In Steam and Gas Turbines practice tests, there will be a series of practice tests wherein you can test your Steam and Gas Turbines concepts on every chapter separately. There are totally 10 different chapters on this subject and hence there will be 10 different practice tests wherein each practice tests covers one chapter exclusively. There will not be any time limit on these tests. So, Steam and Gas Turbines Practice Tests should be the first set of tests which you should attempt. Goto these practice tests here.
2. "Steam and Gas Turbines Mock Tests 1-10" - In Steam and Gas Turbines mock tests, there will be a series of mock tests wherein you can test your Steam and Gas Turbines concepts on every chapter separately, but there will be a fixed time limit per mock test. Here also, there are 10 mock tests wherein each mock test covers only one chapter exclusively. So, it is similar to Steam and Gas Turbines Practice Tests, but with an added constraint of time limits. You should try Steam and Gas Turbines Mock Tests if you are appearing for any online examination soon. Goto these mock tests here.
3. "Steam and Gas Turbines Certification Test" - Once you are thorough with your Steam and Gas Turbines concepts, then you can try our Steam and Gas Turbines Certification Test wherein your name will be mentioned in Top Rankers list, if you scored either Grade A* or Grade A in the Steam and Gas Turbines Certification Test. The Certification Test is free. Goto Steam and Gas Turbines Certification test here.
4. "Steam and Gas Turbines Internship Test" - If you are interested to do Internships in Steam and Gas Turbines at Sanfoundry, then you must take our Steam and Gas Turbines Internship Test. If you scored either Grade A* or Grade A in Steam and Gas Turbines Internship Test, then you are eligible for Internship at Sanfoundry in Steam and Gas Turbines. Goto Steam and Gas Turbines Internship test here.
5. "Steam and Gas Turbines Job Test" - If you are a fresher, a dropout, an experienced person and if you know Steam and Gas Turbines well and looking out for jobs in Steam and Gas Turbines domain at Sanfoundry (or our Network of Companies), then you should try and qualify our "Steam and Gas Turbines Job Test". If you scored either Grade A* or Grade A in Steam and Gas Turbines Job Test, then you are eligible for a Job at Sanfoundry (or our Network) in Steam and Gas Turbines domain. Kindly note that you can repeat this job test after a gap of 30 days from the day of last attempt of the test. Goto Steam and Gas Turbines Job test here.For every "Steam and Gas Turbines Practice Test", Total Questions: 20, Total Time: Unlimited.
For every "Steam and Gas Turbines Mock Test", Total Questions: 20, Total Time: 20 Minutes.
For "Steam and Gas Turbines Certification Test", Total Questions: 50, Total Time: 1 hour.
For "Steam and Gas Turbines Internship Test", Total Questions: 50, Total Time: 1 hour.
For "Steam and Gas Turbines Job Test", Total Questions: 50, Total Time: 1 hour.
Before you get started on these series of online tests on Steam and Gas Turbines, you should learn, study and practice our collection of 1000 MCQs (Multiple Choice Questions and Answers) on Steam and Gas Turbines here. We also prefer that you should practice Steam and Gas Turbines practice tests and mock tests completely before attempting the certification test.
Here is the list of online practice tests and mock tests on Steam and Gas Turbines. Each online test focuses on a "Specific chapter of Steam and Gas Turbines". So, you should try both practice test and mock test on every chapter to do a self-assessment of your knowledge (along with time-limit constraints) in every area or sub-topic of Steam and Gas Turbines. Steam and Gas Turbines Certification test, Internship test, and Job Test are mentioned at the end of this list.
1. Steam and Gas Turbines Test 1 – This set of online test on “Steam and Gas Turbines” tests your skills on Types, Classification based on Flow Passages and Flow Arrangement, Types, Engine and Component – 1, Types, Engine and Component – 2, Classification based on Application, Cycle and Fuel – 1, Classification based on Application, Cycle and Fuel – 2, Combined Power Plant, Advantages, Introduction, Fundamentals of Thermodynamics.
2. Steam and Gas Turbines Test 2 – This set of online test on “Steam and Gas Turbines” tests your skills on Carnot, Rankine and Reheat cycle – 1, Carnot, Rankine and Reheat Cycle – 2, Effect of Pressure and Temperature, Efficiencies, Heat and Steam Rate – 1, Heat and Steam Rate – 2, Sterling and Ideal Ericsson Cycle, Ideal, Actual Inter cooling and Reheat, Combined Effect of Intercooling, Reheating and Regeneration, Closed Cycles and Operating Media Other than Air, Design of Nozzles.
3. Steam and Gas Turbines Test 3 – This set of online test on “Steam and Gas Turbines” tests your skills on Critical Pressure Ratio, Nozzle Losses, Divergence and Position Angles, Wet and Supersaturated Steam, Nozzle Discharge Coefficients and Calculations, Design of Turbine Flow Passages, Energy Distribution and Effect of Carry-Over Velocity, Requirements for Radial Equilibrium and Velocity Diagrams, Elements of Airfoil, Single Airfoil Principle and Limitations.
4. Steam and Gas Turbines Test 4 – This set of online test on “Steam and Gas Turbines” tests your skills on Cascade Principle, Relationship between Velocity Ratios, Turbine Rotor and Blade Stresses, Bending Stresses and Vibrations, Disk Stresses and Blade Fastening, Shrouding and Lacing Wires, Cooling of Gas Turbine Blades, Casing and Metallurgical Considerations, Impulse Turbine Blade Profile, Blade Entrance and Exit Angles, Angle of Efflux.
5. Steam and Gas Turbines Test 5 – This set of online test on “Steam and Gas Turbines” tests your skills on Losses in Impulse Blade Passages, Reaction Blade Profiles, Blade Angle, Gauging and Pitch, Width and Height, Losses in Reaction Blade Passages, Flow Passages with Radial Equilibrium, Free and Forced Vortex, Control and Performance, Control and Supervisory Instruments, Direct Speed Responsive Governors, Hydraulic Speed responsive governor.
6. Steam and Gas Turbines Test 6 – This set of online test on “Steam and Gas Turbines” tests your skills on Pressure Regulators, Speed Regulation and Parallel Operation, Emergency Governors, Turbine Performance and Effect of Throttle Governing, Effect of Initial Pressure and Temperature Changes, Effect of Nozzle Governing, Parsons Number and Quality Factor, Automatic Extraction Turbines, Mixed Pressure Turbine Performance, AIEE-ASME Preferred Standard Turbine.
7. Steam and Gas Turbines Test 7 – This set of online test on “Steam and Gas Turbines” tests your skills on Centrifugal Compressor, Energy Transfer Relation and Losses, Adiabatic Efficiency, Effect of Compressibility, The Diffuser and Prewhirl, Performance Characterstics, Pressure Coefficients and Slip Factor, Surging, Centrifugal Compressors Design Calculations, Combustion and Thermochemistry, Entropy, Chemical Equilibrium and Heat of Reaction.
8. Steam and Gas Turbines Test 8 – This set of online test on “Steam and Gas Turbines” tests your skills on Flame Temperature and Dissociation, Mechanics of Combustion, Physical Characteristics of Combustion and Reactive Mixtures, Pressure Losses, The Combustor, Fuel Injection, Atomization and Combustion Chamber, The Regenerator, Regenerator Types and Mean Temperature Difference, Film Coefficient, Pressure Losses and Regenerator Effectiveness, Economic Aspect of Regenerator Design, Power Plant.
9. Steam and Gas Turbines Test 9 – This set of online test on “Steam and Gas Turbines” tests your skills on Dimensionless Performance Parameters, Twin Shaft Plant, Dimension Parameters of Aircraft Plants, Torque Characteristics, Starting and Performance, Elementary Gas Dynamics, Elementary Airfoil Theory, Usage of Cryogenics in Gas Turbines, Usage of Gas Turbines in Jet Engines, Micro Gas Turbines.
10. Steam and Gas Turbines Test 10 – This set of online test on “Steam and Gas Turbines” tests your skills on Fuel Systems in Gas Turbines, Bearing System in Gas Turbines, Combustion System in Gas Turbines, Turbine Casing and Exhaust Frames, Compressor Parts of Gas Turbines, Inlet and Compressor Casing, Fuels Used in Gas Turbines, Working of a Steam Turbines, Fire Resisting Fluids in Steam Turbines, Hydrogen Seal Rings in Turbine Generator, Steam Turbine Cylinders.
Sanfoundry will issue a Certificate of Merit to Top 5 Rankers for a given month provided that they have scored either A* or A Grade in the Contest. If you are interested, then kindly register below. After registration, you can take the test anytime (24x7).
