My Report

Strength of Materials Practice Test 6


Correct Answer: 2 points | Wrong: -1 point
Grades: A* (100% score) | A (80%-99%) | B (60%-80%) | C (40%-60%) | D (0%-40%)
advertisement

1. Meander ratio is the ratio of meander belt to __________

2. Calculate the maximum bending moment in fixed beam for the following figure.
strength-materials-questions-answers-deflection-fixed-beam-q3

3. Which of the following is a mechanical property of materials?

4. Calculate the maximum deflection of a fixed beam carrying udl of 5 kN/m. The span of beam is 6 m. Take E = 200kN/m2 and I = 5Ɨ107 mm4.

5. As per IRC, maximum width of lane considered as ____________

6. In cantilever beams, the maximum deflection occurs at ___________

7. A cantilever beam subjected to a point load at free end of span ā€œlā€ m and possess flexural rigidity (EI).

8. The upward deflection caused by the prop is _____________

9. Calculate discharge of a weir 2 metre long with a water flow over a head of 250 mm use Francis formula.

10. Stability of high rise vehicles will be affected due to ____________


 

Manish Bhojasia - Founder & CTO at Sanfoundry
Manish Bhojasia, a technology veteran with 20+ years @ Cisco & Wipro, is Founder and CTO at Sanfoundry. He lives in Bangalore, and focuses on development of Linux Kernel, SAN Technologies, Advanced C, Data Structures & Alogrithms. Stay connected with him at LinkedIn.

Subscribe to his free Masterclasses at Youtube & discussions at Telegram SanfoundryClasses.